当前位置: 首页 > EMC > 正文

Data Migration from EMC VNX1/VNX2 to EMC Unity

04For the migration of block resources from the EMC VNX1 and VNX2 platforms, the following solutions are available:
• SAN Copy (Push)
• EMC RecoverPoint
• EMC PowerPath Migration Enabler
• EMC VPLEX
• Host-Based LVM Migration

For file migration solutions from the EMC VNX1 and VNX2 platforms, the following solutions are:
• EMC Select Datadobi Dobiminer
• EMCopy
• Robocopy
• rsync

In virtualized environments leveraging VMware ESXi and vCenter Server, the following solutions are available:
• EMC RecoverPoint for VMs
• VMware Storage vMotion

The following is the high level procedures of SANCopy migration from VNX1/VNX2 storage to EMC Unity:
1) Make sure that SANCopy & SnapView features is enabled on VNX1/VNX2 storage.
2) Create the SANCopy connection between source storage and target Unity storage (eg, FC or iSCSI Channel).
3) Create target LUN on EMC Unity.
4) Create SANCopy “Incremental” session to clone the source LUN to target LUN by Wizard on EMC Unity.

01

5) After that the SANCopy session is successfully created and then you can start to the SANCopy session.

02

6) After the SANCopy session is completed, you can remove the host connectivity of source LUN on VNX storage.
7) Finally you can setup the host connectivity of target LUN on Unity.

03

This video is one demonstration for creating a SAN Copy Session on EMC VNX5500

本文固定链接: http://t.yjsec.com/index.php/2018/03/08/454/ | 下一站

该日志由 admin 于2018年03月08日发表在 EMC 分类下, 你可以发表评论,并在保留原文地址及作者的情况下引用到你的网站或博客。
原创文章转载请注明: Data Migration from EMC VNX1/VNX2 to EMC Unity | 下一站

Data Migration from EMC VNX1/VNX2 to EMC Unity:等您坐沙发呢!

发表评论

快捷键:Ctrl+Enter